D-Link DKVM-IP1 - User Management

4.3.2 User Management
Above: The User Management page lets administrators create new users and adjust permission
levels of existing users.
The DKVM-IP1 comes pre-configured with a factory default “super user” account that is
permitted to make all possible configuration changes and use all the device’s functions.
The factory default username and password for this super user is “super” and “pass”. Make
sure you change the password immediately after you have installed your DKVM-IP1.
User Management Settings Page
Name Description
Existing users Select an existing user for modification. Once a user has been
selected, click the Lookup button to display the user’s information.
New User name Enter a name for the new user account.
Password Enter a password for the selected user. It must be at least three
characters long.
Confirm password Re-enter the password for the selected user for confirmation.
Email address Enter the user’s e-mail address here. (optional)
79