• Soft Keyboard
Click this menu item to open up the submenu for the Soft Keyboard.
Soft Keyboard > Show
Clicking this item brings up the Soft Keyboard. The Soft Keyboard may be necessary if your
Host system runs a completely different language and country mapping than your Remote
computer.
Above: Soft Keyboard > Show
Soft Keyboard > Mapping
This menu item is used for choosing the specific language
and country mapping of the Soft Keyboard.
• Local Ke
yboard
This submenu is used to change the language-specific mapping
of the Remote computer. The term “Local” is from the
perspective of the Remote-side user. Normally, the software of
the Host Console determines the correct value automatically.
However, depending on the particular Remote-side Java Virtual
Machine and browser settings, this is not always possible. A
typical example is a German-based Remote Control system that
uses English keyboard mapping. In such a case, you will need
to change the “Local Keyboard” setting (for the Remote Control
side) to the correct language.
46
To Next Page
Loading...
