Configuring the Remote Wakeup target systems’ details on the DKVM-IP1:
The DKVM-IP1 can be easily configured via its web GUI.
A.
In the DKVM-IP1’s web GUI, click on Remote Control > Remote Wakeup to bring up the
configuration page.
B. Type in the computer/server description and the computer/server’s IP address.
C. Click on the Get MAC button to obtain and automatically add the corresponding MAC
address of the selected computer/server.
D. Click on the Apply button to save the entry.
E. Click on the Reset to defaults button if you want to clear all entries.
F. If you want to configure multiple target systems, click on the More entries button to add
more target computers/servers. Repeat steps B to D for all target systems.
59
To Next Page
Loading...
