The maximum size of the floppy image disk is 1.44MB. This drive is in read-only mode and does
not allow you to write any information on the drive. This drive can act as a boot drive if the
motherboard/BIOS on the Host computer supports the USB BOOTABLE function.
Notes:
1. For any image-creating software, the output image’s file extension must be “.img”, e.g.
“floppy_vir.img”.
2. The uploaded disk image file will be kept in the onboard memory of the DKVM-IP1 until the end
of the current session. A session ends when you log out or initiate a reboot of the DKVM-IP1.
71
To Next Page
Loading...
