D-Link DPR-1020 User Manual

Setting up Printing in Mac OS X Tiger (10.4.9)
D-Link DPR-1020 - User Manual 165
printer is found. The Printer Browser will indicate that it is verifying the address. If
the printer is found, the Printer Browser will state “Valid and complete address” in
the Address field.
The printer utility is able to detect the printer and may automatically select the
correct printer driver in the Print Using field. You can manually select the
printer-maker from the Print Using drop-down menu, and then select the printer
model from the scroll-down list - or select Generic PostScript Printer option from
the Print Using drop-down menu if the model is not listed. To implement the setting,
click the Add button.
The setup procedures for these three printing protocols (Internet Printing Protocol
(IPP), Line Printer Daemon (LPD), and HP Jet Direct – Socket) are essentially the
same. Illustrated examples are included below as a reference.

D-Link DPR-1020 Specifications

General

Networking standards	IEEE 802.3, IEEE 802.3u
Network connection type	Ethernet LAN
Dimensions (WxDxH)	67 x 106 x 25 mm
Power requirements	5.0V DC/2.5A
Compatible operating systems	Windows Vista/XP/2000/NT4/ME/98SE/95 Apple Mac OS 9.x - MAC OS X 10.4.x Linux UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) NetWare 5.x
DC-in jack	Yes
USB 2.0 ports quantity	1
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Certification	FCC Class B, CE, C-Tick, IC, CSA
Package depth	225 mm
Package width	150 mm
Package height	75 mm
Package weight	520 g

Weight and Dimensions

Depth	106 mm
Width	67 mm
Height	25 mm
Weight	77 g