D-Link DPR-1020 User Manual

Introduction
D-Link DPR-1020 - User Manual 4
manufacturer drivers without creating a physical USB connection from your printer to
your computer. After the software provided by your printer’s manufacturer is installed,
using the printer’s scan and fax functions will be exactly the same as how it’s
described in your printer’s manual.
 Use PS-Wizard to easily add a network printer on Windows for traditional TCP/IP
printing.
The DPR-1020 is compatible with all major network operating systems and
protocols:
 TCP/IP
UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) Windows NT/2000,
Windows 95/98SE/ME, Windows XP/Vista, NetWare 5.x NDPS LPR Remote
Printing
 NetBEUI
Windows NT/2000/XP, Windows 95/98SE/ME, Windows for Workgroups, Microsoft
LAN Manager, IBM LAN Server
 AppleTalk
MacOS EtherTalk
The PS software, PS Link and PS Wizard, allows further configuration of the MFP
server:
¾ PS-Link －Use this to enable your computer to use your printer’s
print/scan/fax/copy functions and GDI printing. PS-Link helps you to install your
printer’s manufacturer drivers without creating a physical USB connection from
your printer to your computer. For more information see the “Using The PS
Software Chapter”.

D-Link DPR-1020 Specifications

General

Networking standards	IEEE 802.3, IEEE 802.3u
Network connection type	Ethernet LAN
Dimensions (WxDxH)	67 x 106 x 25 mm
Power requirements	5.0V DC/2.5A
Compatible operating systems	Windows Vista/XP/2000/NT4/ME/98SE/95 Apple Mac OS 9.x - MAC OS X 10.4.x Linux UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) NetWare 5.x
DC-in jack	Yes
USB 2.0 ports quantity	1
Storage temperature (T-T)	-25 - 55 °C
Operating temperature (T-T)	0 - 40 °C
Certification	FCC Class B, CE, C-Tick, IC, CSA
Package depth	225 mm
Package width	150 mm
Package height	75 mm
Package weight	520 g

Weight and Dimensions

Depth	106 mm
Width	67 mm
Height	25 mm
Weight	77 g