D-Link DPR-1020 - Using the PS Software; Auto-Run Installation

Using the PS Software
D-Link DPR-1020 User Manual 13
Using the PS Software
This chapter will introduce you to the installation and operation of the PS Software
(PS-Link and PS-Wizard) with which the MFP Server can be configured further.
Auto-Run Installation
Insert the included installation CD into your computer’s CD-ROM drive to initiate the
auto-run program. If auto-run does not start, click My Computer > [CD ROM Drive
Letter].
The content of the installation CD-ROM includes:
• Install PS Software – click this to install the PS Software, which contains
PS-Link and PS-Wizard that can configure more settings for the MFP Server,
such as:
- Change the IP address
- Support the multi-functions (Print/Scan/Copy/Fax) of a MFP printer, GDI
printing, and other software from any MFP/GDI printer.
- Easily add a printer to your computer.
• View Quick Installation Guide – click this to preview the Quick Installation
Guide in PDF format for step-by-step instructions of the MFP Server
Installation.
• View Manual – click this to preview the User Manual in PDF format for
detailed information regarding the MFP Server.
• Install Acrobat Reader – click this to install Acrobat Reader for the viewing and
printing of PDF files found in this Installation CD-ROM.
• Exit – click to close the Auto-Run program.