Setting up AppleTalk Printing in Mac OS 9
D-Link DPR-1020 - User Manual 174
may vary slightly depending on what printer driver version you are using. The
procedure described below assumes you are using LaserWriter 8.
To choose a printer connected to the MFP server as your MacOS workstation‘s
default printer, open the Chooser by selecting Chooser from the Apple menu. Select
the LaserWriter 8 icon on the left. Make sure that AppleTalk is set to Active.
A list of all networked PostScript printers will be displayed as follows.
Double-click the name of the Printer Port you wish to use. The Printer Ports shown
are examples only.
If you have not previously set this printer as the default, your computer will prompt
you for a PostScript Printer Description file. Choose Select PPD.
To Next Page
Loading...
