D-Link DSL-2750E User Manual

DSL-2750E User Manual
28
Field Description
Enable DHCPv6
Server
Choose to enable or disable DHCPv6 service.
LAN address
config mode
Set the mode address obtaining mode of LAN PCs.
You may choose Stateless or Statefull.
Start/End Interface
ID
The address pool using DHCPv6 for address
assignment under statefull mode.
DHCPv6 Lease
Time
The address lease time using DHCPv6 for address
assignment under statefull mode.
Enable RADVD
Choose to enable or disable router advertisement
(RADVD) service.
Auto get prefix
from WAN
Use the site prefix obtained at the WAN side as the
prefix to issue.
Static Manually add a site prefix.
3.2.6 Time and Date
Choose Setup > Time and Date. The page shown in the following figure
appears.

D-Link DSL-2750E Specifications

ADSL Standards

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite ADSL downstream	up to 1.5 Mbps
G.lite ADSL upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Media Interface

ADSL interface	RJ-11 connector for connection to 24/26 AWG twisted pair telephone line
LAN interface	RJ-45 port for 10/100BASE-T Ethernet connection