DSL-2750E User Manual
47
Field Description
Time DSL or Ethernet uplink is disconnected.
Recovery Delay
Time
The time interval to re-dial.
Initialize Delay
Time
The time for 3G card to initialize.
Mode Switch
Delay Time
The time for mode switch.
After setting, click Apply to make the settings take effect. Click AutoSet to keep
the settings as default.
Note:
If you want to go back to the main page of 3G configuration, click 3G
Configuration listed in the menu of left pane.
3.3.6 Parental Control
Choose ADVANCED > Parental Control. The Parent Control page shown in
the following figure appears.
To Next Page
Loading...
