EasyManuals Logo

D-Link DSL-2750E User Manual

D-Link DSL-2750E
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
DSL-2750E User Manual
37
Click Add to add a virtual server.
Select a service for a preset application, or enter a name in the Custom Server
field.
Enter an IP address in the Server IP Address field to appoint the corresponding
PC to receive forwarded packets.
The Ports show the ports that you want to open on the device. The TCP/UDP
means the protocol type of the opened ports.
Click Apply to save the settings.
3.3.3 DMZ
DMZ is the abbreviation of the Demilitarized Zone. Since some applications
are not compatible with NAT, the device supports the use of a DMZ IP address for
a single host on the LAN. This IP address is not protected by NAT and it is visible
to agents on the Internet with the correct type of software. Note that any client PC
in the DMZ is exposed to various types of security risks. If you use the DMZ, take
measures (such as client-based virus protection) to protect the remaining client
PCs on your LAN from possible contamination through DMZ.

Other manuals for D-Link DSL-2750E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2750E and is the answer not in the manual?

D-Link DSL-2750E Specifications

ADSL Standards IconADSL Standards
G.dmt full rate downstreamup to 8 Mbps
G.dmt full rate upstreamup to 1 Mbps
G.lite ADSL downstreamup to 1.5 Mbps
G.lite ADSL upstreamup to 512 Kbps
G.dmt.bis full rate downstreamup to 12 Mbps
G.dmt.bis full rate upstreamup to 12 Mbps
ADSL full rate downstreamup to 24 Mbps
ADSL full rate upstreamup to 1 Mbps
Media Interface IconMedia Interface
ADSL interfaceRJ-11 connector for connection to 24/26 AWG twisted pair telephone line
LAN interfaceRJ-45 port for 10/100BASE-T Ethernet connection

Related product manuals