DSL-2750E User Manual
24
Field
Description
Update Interval encrypted with a password. For higher security, WPA
password is updated periodically. This value is the
update interval of the WPA password.
Click Apply to save the settings.
3.2.4 Local Network
You can configure the LAN IP address according to the actual application. The
preset IP address is 192.168.1.1. You can use the default settings and DHCP
service to manage the IP settings for the private network. The IP address of the
device is the base address used for DHCP. To use the device for DHCP on your
LAN, the IP address pool used for DHCP must be compatible with the IP address
of the device. The IP address available in the DHCP IP address pool changes
automatically if you change the IP address of the device.
You can also enable the secondary LAN IP address. The two LAN IP addresses
must be in different networks.
Choose Setup > Local Network. The Local Network page shown in the
following figure appears.
To Next Page
Loading...
Need help?
ADSL Standards
