DSL-2750E User Manual
23
The above figure shows the when the Security Mode is set as Auto (WPA or
WPA2). The following table describes the parameters in this page.
Field
Description
WPA
Encryption
You can select WPA encryption to be AES or
.
WPA Mode
Select Auto (WPA or WPA2)-PSK, enter the
pre-shared key in the Pre-Shared Key field.
Select Auto (WPA or WPA2)-Enterprise
(RADIUS), enter the port, IP address, and password of
the Radius server. You need to enter the username
and password provided by the Radius server when the
To Next Page
Loading...
Need help?
ADSL Standards
