EasyManuals Logo

D-Link DSL-2750E User Manual

D-Link DSL-2750E
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
DSL-2750E User Manual
32
Wireless Network Name (SSID): The Wireless Network Name is a unique name
that identifies a network. All devices on a network must share the same wireless
network name in order to communicate on the network. If you decide to change
the wireless network name from the default setting, enter your new wireless
network name in this field.
These settings are only for more technically advanced users who have sufficient
knowledge about wireless LAN. Do not change these settings unless you know
the effect of changes on the device.
Click Apply to save the settings.
3.3.1.2 MAC Filtering
Select MAC Filtering. The page shown in the following figure appears.
Choose Enable Access Control Mode, and then click Add to add a MAC
Address as shown in the following figure.
Click Apply to finish.
3.3.1.3 Security Settings
Select Security Settings. The page shown in the following figure appears.

Other manuals for D-Link DSL-2750E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-2750E and is the answer not in the manual?

D-Link DSL-2750E Specifications

ADSL Standards IconADSL Standards
G.dmt full rate downstreamup to 8 Mbps
G.dmt full rate upstreamup to 1 Mbps
G.lite ADSL downstreamup to 1.5 Mbps
G.lite ADSL upstreamup to 512 Kbps
G.dmt.bis full rate downstreamup to 12 Mbps
G.dmt.bis full rate upstreamup to 12 Mbps
ADSL full rate downstreamup to 24 Mbps
ADSL full rate upstreamup to 1 Mbps
Media Interface IconMedia Interface
ADSL interfaceRJ-11 connector for connection to 24/26 AWG twisted pair telephone line
LAN interfaceRJ-45 port for 10/100BASE-T Ethernet connection

Related product manuals