DSL-2750E User Manual
59
The following table describes the parameters of this page.
Field Description
Enable Tick in the box to enable this QoS rule.
Ip Protocol Type Select the protocol type as
.
Input Interface
Based on the Classify Type, choose a WAN/LAN
interface.
802.1P Choose a matched 802.1P VLAN priority.
DSCP Check Choose a matched DSCP type.
Protocol Type Choose a protocol type matching with the QoS rule.
Classify Queue Choose a QoS queue for the rule.
DSCP Mark Set a DSCP Mark for this QoS rule.