D-Link DSL-2760U

D-Link DSL-2760U USER’S MANUAL
34
Step 3 - IPoE
Network Address Translation Settings:
Network Address Translation (NAT) allows you to
share one Wide Area Network (WAN) IP address
for multiple computers on your Local Area
Network (LAN).
Select Enable Firewall to use the default firewall
options on this interface.
Select Enable IGMP Multicast to allow IGMP
Multicasting on this interface.
Click Next to continue the setup
Step 4 - IPoE
Routing – Default Gateway:
Select a preferred wan interface as the system
default gateway.
Click Next to continue the setup.