D-Link DSL-2760U

D-Link DSL-2760U USER’S MANUAL
44
Step 3 - IPoA:
WAN IP Address:
WAN Subnet Mask:
WAN IP Settings
Enter the WAN IP address used here.
Enter the subnet of the WAN IP address.
Click Next to continue the setup.
Step 4 – IPoA
Enable NAT:
Enable Firewall:
IGMP Multicast:
Network Address Translation Settings:
Tick this option to enable NAT for this connection.
Tick this option to enable firewall for this
connection.
Tick to enable IGMP Multicast Proxy.
Click Next to continue the setup.