To create a new interface group:
1. Enter the Group name and the group name must be unique and select
either 2. (dynamic) or 3. (static) below:
2. If you like to automatically add LAN clients to a WAN Interface in the new
group add the DHCP vendor ID string. By configuring a DHCP vendor ID
string any DHCP client request with the specified vendor ID (DHCP option
60) will be denied an IP address from the local DHCP server.
3. Select interfaces from the available interface list and add it to the grouped
interface list using the arrow buttons to create the required mapping of the
ports. Note that these clients may obtain public IP addresses
4. Click the Apply/Save button to make the changes effective immediately
IMPORTANT: If a vendor ID is configured for a specific client device please
REBOOT the client device attached to the modem to allow it to obtain an
appropriate IP address.
To Next Page
Loading...
Need help?
General
