D-Link DSL-3900 - Static IP

33D-Link DSL-3900 User Manual
Section 4 - Conguration
Static IP
Select Static IP if your ISP provides you with a specic IP address.
WAN Settings
Connection: Select Static IP Address.
WAN Service Type: Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are conguring your connection manually and your ISP
has not specied this setting, selecting INTERNET is recommended.
Connection Type: Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC, or Routed
IP VC-Mux.
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Gateway Address: Enter the default gateway address provided by your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
NAT Enable: Enable or disable Network Address Translation.
Enable PPPoE
Passthrough
Enable or disable PPPoE Passthrough.
Click Save when you are done.