D-Link DSL-3900 - Pppoe

34D-Link DSL-3900 User Manual
Section 4 - Conguration
PPPoE
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
WAN Settings
Connection: Select PPPoE.
WAN
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Conrm Password: Enter the password provided by your ISP again.
Connection Type: Select PPPoE LLC or PPPoE VC-Mux.
Service Name: optional
AC Name: optional
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage Select Default Route or None.
NAT Enable: Enable or disable Network Address Translation.
Enable PPPoE
Passthrough
Enable or disable PPPoE Passthrough.