D-Link DSL-3900 User Manual

47D-Link DSL-3900 User Manual
Section 4 - Conguration
Advanced Settings
You may select one of the following DHCP mode behaviors:
Disable DHCP
Server:
Select this option to disable the DHCP server. No further conguration
is available.
Enable DHCP
Server:
Select this option to enable the DHCP server.
DHCP Relay: Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network.
If you selected Enable DHCP, the following options are available:
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
DHCP Lease Time: Select the DHCP lease time from the drop down menu.
Option60 Vendor
ID:
Enter Option60 information here. (Optional)
Primary DNS
Server:
Enter the primary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Secondary DNS
Server:
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Network - Advanced Settings

D-Link DSL-3900 Specifications

General

Ethernet WAN	Yes
SIM card slot	-
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
WLAN data transfer rate (max)	2600 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
WLAN data transfer rate (second band)	1753 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
Security algorithms	WPA, WPA2
Processor cores	2

Weight and Dimensions

Depth	45.5 mm
Width	258.8 mm
Height	184.1 mm