DVG-5004S User’s Manual VoIP Gateway Configuration
D-Link Systems, Inc. 55
ACS Password: Enter the password.
Connect Provision Server During Start Up: It allows DVG connect to a TR069 server as it starts up.
Connect Provision Server Periodically: It allows DVG connect to a TR069 server periodically according
to following parameters.
Auto Provision Interval: Enter the time for auto provisioning.
Random Offset: Enter the offset of the time for auto provisioning.
Provision Retry Times: Enter the retry time if a provisioning attempt fails.
Retry Interval: Enter the interval for retrying.
Listen Port: TR069 listen port for remote trigger.
Connection Request Username: Enter username for remote trigger.
Connection Request Password: Enter password for remote trigger.
Suspend Service: Check the box to stop VoIP call service.
TFTP Source Port: Assign TFTP sourct port for TFTP download.
Note: Contact your server provider if necessary.
MAINTENANCE → Provision
Binding Server for Trigger: Check the box to trigger a connection between Provisioning Server and the
VoIP Gateway. Provisioning Server will bind a port for the VoIP Gateway to send provision request.
Binding Port: Enter the port number of Provisioning Server is used for binding.
Binding Interval: Enter the interval at which the VoIP Gateway will keep the binding.
To Next Page
Loading...
