DVG-5004S User’s Manual VoIP Gateway Configuration
D-Link Systems, Inc. 74
3-7-4 System Log
System settings → System log
Enable: Check the box to send event notification messages across IP networks to the Server.
Server Address: Enter the System Log Server’s IP address.
Port: Enter the System Log Server’s listening port. Leave this field to the default if your VoIP Service
Provider did not provide you a server port number for System Log Server.
3-7-5 Save / Restart
Save and Reboot
System settings → Backup and Restore
Save All Settings: Click the Save All Settings check box and reboot the system after completing changes.
The new settings will take effect after the VoIP Gateway is restarted.
Restart: Click the Reboot button to reboot the system.
To Next Page
Loading...
