DVG-5004S User’s Manual VoIP Gateway Configuration
D-Link Systems, Inc. 66
3-4-16 Virtual Server
Enable users on Internet to access the WWW, FTP and other services from your NAT. It is also known as
port forwarding. When remote users are accessing Web or FTP servers through WAN IP address, it will be
routed to the server with LAN IP address.
Advanced Settings → Virtual Server
Enable Virtual Server: Check the box to enable port forwarding.
WAN Port Range: Enter the port range for the WAN side.
TCP/UDP: Select the communication protocols used by the server, TCP, UDP or Both.
LAN Host IP Address: Enter the IP address of the device that provides various services.
Server Port Range: Enter comments.
Remark: Enter comments.
To Next Page
Loading...
