24D-Link DVG-5802S User Manual
Section 3 - Conguration
Select the Channel Width:
Auto 20/40
- Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - This is the default setting. Select if you are not using any 802.11n wireless clients.
Select the transmit rate. It is strongly suggested to select Best (Auto) for best performance.
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DVG-5802S. If Invisible is
selected, the SSID of the DVG-5802S will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DVG-5802S in order to connect to it.
Refer to page 71 for more information regarding wireless security.
Visibility
Status:
Transmission
Rate:
Channel
Width:
Wireless
Security:
To Next Page
Loading...
