D-Link DVG-5802S - Leds; Hardware Overview

8D-Link DVG-5802S User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Power LED
A solid light indicates a proper connection to the power supply.
Status LED
A blinking light indicates that the DVG-5802S is ready.
Local Network LEDs
A solid light indicates a connection to an
Ethernet-enabled computer on ports 1-4.
This LED blinks during data transmission.
USB LED
Insert a USB ash drive with
WCN information. The LED will
blink 3 times if it successfully
transfers the wireless settings.
Internet LED
A solid light indicates connection on
the Internet port. This LED blinks
during data transmission.
WLAN LED
A solid light indicates that the wireless
segment is ready. This LED blinks
during wireless data transmission.
WPS LED
A blinking light
indicates that the
H/W WPS bottom
is pushed.