D-Link DVG-5802S - Advanced Voip

51D-Link DVG-5802S User Manual
Enable/ Disable the STUN Client. Note the STUN
Refresh option below.
Enter the URL or IP address and specic port of
the desired STUN server.
Enter the refresh interval for connecting with
STUN server. Note that if the value 0 (zero) is
entered, STUN is also disabled even if Enable
STUN is set/toggled.
Enable/ Disable the NAT ping client. Note the
NAT PING Refresh option below.
Enter the refresh interval for communicating with
the SIP server. Note that if the value 0 (zero) is
entered, NAT ping is also disabled even if Enable
NAT PING is set/ toggled.
Enable STUN:
STUN Server
Port:
STUN Refresh
Interval:
Enable NAT
Ping:
NAT Ping
Refresh
Interval:
Advanced VoIP
From the drop-down menu, set Codec priority.
Select the Codec as priority one.
Select the Codec as second priority.
Select the Codec as third priority.
Set the Codec packet time from 10ms to 100ms from drop-down menu
Set RTP Type of Service value
Set SIP Type of Service value
Codec One:
Codec Two:
Codec Three:
Packet Time:
SIP TOS: