D-Link DVG-5802S - Page 29

29D-Link DVG-5802S User Manual
Section 3 - Conguration
Enter a valid dial plan for your local environment (this
is typically precongured by your Service Provider).
Set the emergency number, i.e. 911
Enable/Disable the Emergency CPC function. While
dialed number is emergency number user dened,
user will not able to terminate the emergency call (i.e.
911). If user go on hook the phone, it will ring back to
connect again. And the emergency dialplan will also
kick outgoing call if the number is matched.
Enable/ Disable the Call Waiting feature. This feature
lets you accept multiple calls simultaneously, placing
the calls currently unattended to on hold.
Enable/ Disable the Hook Flash button functionality
on the phone.
Enable/ Disable the Call Forward feature and set your
forward calls to the number dened in unconditional
/ Busy / No Answer selection.
Unconditional Call Forward: Input the unconditional
call forward number.
Busy Call Forward: Input the Busy call forward
number.
No Answer Call Forward: Input the No Answer call
forward number.
Set whether SIP INFO body type should be DTMF-
Relay or Telephone-Event. Default is DTMF-
Relay. This determines the format of SIP INFO
sent through a session. Please refer to RFC 2833
to gain an understanding of the IETF specified
recommendations.
Dial plan:
Interdigit Timeout:
Emergency
Dialplan:
Enable
Emergency CPC:
Enable Call
Waiting:
Service side Hook
Flash:
Enable Call
Forward:
SIP INFO body
type: