DVG-N5412SP User’s Manual ADVANCED
D-Link Systems, Inc. 62
ADVANCED → VoIP → FAX
Switch FAX On CED Detection: DVG will send FAX Re-Invite immediately as it detect FAX CED tone, that
will save handshaking time between FAX machines.
Restrict T.38: DVG will reject T.38 Re-invite in case the FAX type contains without T.38.
FAX Detection Sensitivity: To set higher value to make DVG to be more sensitive.
High Speed Redundancy: Set redundancy packets for FAX image. It could repair FAX image for
non-continuous packets lost. The higher redundancy the higher bandwidth required.
Low Speed Redundancy: Set redundancy packets for FAX handshaking signaling.
FAX Codec: Select G.711 a-law or G.711 u-law for T.30 from the drop-down menu.
T.30 Bypass Payload Type: Fill correct payload type of T.30 bypass method.
FAX Jitter Buffer: Enter the buffer or jitter when receiving packets.
Note: When you send a fax over an IP network, the IP network needs to support fax over IP
functionality (either T.38 or T.30). Please consult your VoIP Service Provider for this setting.
To Next Page
Loading...
