DVG-N5412SP User’s Manual ADVANCED
D-Link Systems, Inc. 80
3-2-4-2 Access Control
The Access Control setting provides a service that you can control different access rights for different
wireless clients connected to your VoIP Router. The local and remote stations are limited to access Internet
through your Access Points using MAC address of wireless client. Choose the appropriate Access Control
Services from Wireless Access Control Mode option.
ADVANCED -> Advanced Wireless -> Access Control
Access Control Mode--
Disable: The VoIP Router does not response to any access rules. You are not allowed to make
configuration changes on this page.
Allow: When Allow Listed is enabled, only those wireless clients whose MAC addresses are in the Access
Control List have rights to connect to your Access Point.
Deny: When Deny Listed is enabled, only those wireless clients whose MAC addresses are in the Access
Control List will be blocked and restricted access to your Access Point.
MAC Address: Specify the MAC address which you want to allow/deny access your Access Point.
Comment: The space is reserved for comment or notation.
To Next Page
Loading...
Need help?
General
