DVX IPPBX
46 / 130
destinations, please go to Inbound Control->Inbound Routes page, set the inbound call
destination as “Goto Time Rule” and then select the exact time rule that you have defined, then
all inbound calls will be routed according to the time conditions you have configured.
3.3.6 Office Closed Timing
Office closed timing is an extending of time based rules, you can manually activate office closed
timing by feature code. This feature allows much more flexible time conditions to be temporarily
applied for the offices which may have some unscheduled businesses and activities off the time
table of the time based rule/rules.
For example, the office opens in the morning but there’s an event in the afternoon and by then
nobody will be able to answer phone calls. You can direct the inbound calls to an extension’s
voicemail or the closed time IVR.
Enable Office Closed Timing: By dialing the feature code on the phone, you can activate
office closed timing. (Default is *81)
Disable Office Closed Timing: By dialing the feature code on the phone, you can deactivate
office closed timing. (Default is *081)
Destination: The destination of the inbound calls while office closed timing is activated. It
To Next Page
Loading...
Need help?
General
