D-Link DWL-2100AP Command Line Interface Reference Manual

802.11 b/g Access Point Command Line Interface Manual
17
8
RADIUS SERVER COMMANDS
Get Command: Function Syntax
get radiusname Display RADIUS server name or IP address get radiusname
get radiusport Display RADIUS port number get radiusport
get radius2ndstate Display the second RADIUS Mode get radius2ndstate
get radiusname2nd Display the second RADIUS server name or IP address get radiusname2nd
get radiusport2nd Display the second RADIUS port number get radiusport2nd
get radiussecret2nd Display the second RADIUS shared secret get radiussecret2nd
get radiuscfgid Display the configuration of radius now get radiuscfgid
get accountingstate Display Accounting Mode get accountingstate
get accountingname Display Accounting server name or IP address get accountingname
get accountingport Display Accounting port number get accountingport
get accounting2ndstate Display second Accounting Mode get accounting2ndstate
get accounting2ndname Display second Accounting server name or IP address get accounting2ndname
get accounting2ndport Display second Accounting port number get accounting2ndport
get radiussecret Display RADIUS shared secret get radiussecret
Set Command: Function Syntax
set radiusname Set RADIUS Server name or IP address
set radiusname <DNS name::xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set radiusname2nd Set the second RADIUS name or IP address set radiusname2nd <string>.
set radiusport2nd Set the second RADIUS port number set radiusport2nd [index]
set radiussecret2nd Set the second RADIUS shared secret set radiussecret2nd
set accountingstate Set Accounting Mode set accountingstate [disable: enable]
set accountingname Set Accounting name or IP address set accountingname <string>
set accountingport Set Accounting port number set accountingport <string>
set accounting2ndstate Set second Accounting Mode set accounting2ndstate [disable: enable]
set accounting2ndname Set second Accounting name or IP address set accounting2ndname <string>
set accounting2ndport Set second Accounting port number set accounting2ndport [index]
set radiusport Set RADIUS port number
set radiusport <xxxxx>
Explanation: <xxxxx> is port number, default value is 1812
set radiussecret Set RADIUS shared secret set radiussecret

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater