D-Link DWL-2600AP

Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 103
January 2015
Section 8 - Conguring Client Quality of Service (QoS)
RADIUS
Attribute
ID Description Type/Range
Vendor-Specic (26),
LVL7-Wireless-Client-
ACL-Up
6132,121 Access list identier to be applied to 802.1X authenticated
wireless client trafc in the inbound (up) direction.
If this attribute refers to an ACL that does not exist on the AP, all
packets for this client will be dropped until the ACL is dened.
Type: string
5-36 characters (not null-terminated)
The string is of the form “type:name”
where: type = ACL type identier:
IPV4, IPV6, MAC
: = required separator character
name = 1-31 alphanumeric characters,
specifying the ACL number (IPV4) or
name (IPV6, MAC)
Vendor-Specic (26),
LVL7-Wireless-Client-
Policy-Dn
6132,122 Name of DiffServ policy to be applied to 802.1X authenticated
wireless client trafc in the outbound (down) direction.
If this attribute refers to a policy name that does not exist on the
AP, all packets for this client will be dropped until the DiffServ
policy is dened.
Type: string
1-31 characters (not null-terminated)
Vendor-Specic (26),
LVL7-Wireless-Client-
Policy-Up
6132,123 Name of DiffServ policy to be applied to 802.1X authenticated
wireless client trafc in the inbound (up) direction.
If this attribute refers to a policy name that does not exist on the
AP, all packets for this client will be dropped until the DiffServ
policy is dened.
Type: string
1-31 characters (not null-terminated)
Table 57 - Client QoS RADIUS Attributes