13D-Link E15 User Manual
Section 2 - Installation
Assessing Uplink Signal Strength
Poor Ok Good Best
The Status LED will turn solid white when the E15 has connected successfully to a wireless network and is extending that network.
If the Smart Signal LED has a single orange bar after the connection process has nished, the E15 has established a poor quality
connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve the connection quality, the E15
should be relocated closer to the main wireless router. Using the 5 GHz extension network is recommended in order to achieve the
fastest wireless speeds. If the extender has been congured as an access point and is connected via an Ethernet cable to the main
router, the Smart Signal LED will not be lit.
To Next Page
Loading...
