38D-Link E15 User Manual
Section 3 - Conguration
Upgrade
This page allows you to upgrade the extender’s rmware, either automatically or manually. To manually upgrade the rmware,
download the latest rmware le from http://support.dlink.com in advance. To access this page, go to Management > Upgrade.
Click Save to apply the settings when you are done with your changes.
Firmware
Current Firmware
Version
The current rmware's version will be displayed.
Check for New
Firmware
Click this button to start checking for a new rmware version.
If a new version is found, it will prompt you to install it.
Automatic Firmware Upgrade
Automatic Upgrade If enabled, the extender will automatically check for and upgrade
to the latest rmware available.
Choose Upgrade Time You may set the E15 to automatically upgrade its rmware at a
set time by enabling this function. Set the hour and minute for
automatic upgrade every day.
Upgrade Manually
Upgrade Firmware If you wish to upgrade manually, rst download the rmware le
you wish to upgrade to. Then, click Select File to nd the le and
click Upload to install the new rmware.
To Next Page
Loading...
