42D-Link E15 User Manual
Section 4 - Wi-Fi Mesh Setup
Step 1
Connect and plug in the E15 close to your Wi-Fi mesh router and wait for the
LED light to blink orange.
Step 2
Use the Ethernet cable to connect the E15 to one of the LAN ports on the Wi-
Fi mesh router. The pairing process may take a few minutes. The Status LED
on the E15 will turn solid white once it has nished pairing with your Wi-Fi
mesh router.
< 1 m
Setup Using an Ethernet Cable
Step 3
Disconnect the Ethernet cable and unplug the E15. Place the E15 anywhere
between your router and the area where you want expanded wireless
coverage.
To Next Page
Loading...
