D-Link Eagle Pro AI AX1500 E15 - Access Point Mode Configuration

22D-Link E15 User Manual
Section 3 - Conguration
Access Point Mode Settings
This page lets you congure the settings to use the E15 as an access point. Connect an Ethernet cable from your main router’s LAN
port to the LAN port of the E15.
To access this page, go to Settings > Extender. Click Save to apply the settings and return to the home page.
Under Existing Network, choose Ethernet to utilize the E15 as an access point. Refer to “Extender Settings” on page 27 for more
information regarding conguration options.