31D-Link E15 User Manual
Section 3 - Conguration
Wireless - Smart Connect Disabled (Continued)
5 GHz Extended Wi-Fi
Status Enable or disable the 5 GHz network by toggling this slider.
Wi-Fi Name (SSID) This is the name of the E15’s extended network. If using
Wi-Fi, the E15 will rebroadcast the uplink router’s Internet
connection under this SSID. You may also manually set the
SSID of the extended network.
Password Enter the password or network key for connecting with the
extended Wi-Fi network.
Security Mode Select a connection security requirement from the following:
None, WPA/WPA2-Personal, WPA2-Personal, WPA2/WPA3-
Personal, or WPA3-Personal. WPA3 provides the highest level
of encryption among these. Note that WPS will be disabled if
WPA3 is used.
802.11 Mode Select the Wi-Fi standard for wireless communication from
these options: Mixed 802.11a/n/ac/ax, Mixed 802.11a/n/ac,
Mixed 802.11a/n, or 802.11a only.
Schedule Select the time during which the wireless network will be
available. The schedule may be set to Always Enable or you
can add your own schedules.
To add a schedule:
Each box represents half an hour, with the clock time (0~23) at
the top of each column. To add a time period to the schedule,
simply click on the start time and drag to the end time. You
can add multiple days and multiple periods per day to the
schedule.
Wi-Fi Protected Setup
WPS-PBC Status Enable or disable Wi-Fi Protected Setup (WPS).
To Next Page
Loading...
