D-Link ShareCenter Pulse DNS-320

30D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration
Hard Drive Conguration Wizard

hen you click the Set RAID type and Re-Format button in the Disk Management-Hard Drive Conguration menu, a wizard will launch allowing
you to format your drives and create the RAID format. The following is an example of a RAID1 conguration:
Initially the steps of the conguration process are shown. You must decide
on the RAID type you would like to format your HDDs with. Click the Next
button to continue or click Exit to cancel.
This screen displays the currently installed HDD information. Any data
on the installed hard drives will be lost by the formatting. Click Next to
continue.