D-Link ShareCenter Pulse DNS-320

88D-Link ShareCenter Pulse DNS-320 User Manual
Section 4 - Conguration

inished:
 !"
on Finish if you are satised with all the settings of the Backup job
created. Otherwise click on the Previous button to go back and make
changes. Alternatively click on Exit to end the conguration without
adding a Remote Backup job.
#
emote
Backups list:
$
ask: The name of the Remote Backup job.
Schedule: When the Remote Backup job will execute.
Status: Current status which can be
• Ready the remote backup job is ready to be executed.
• Finished the remote backup job has executed completely and
successfully.
• Failed the Remote backup job was unsuccessful during execution.
Enable/Disable: If the button shows a red circle the remote backup job
is enabled. Click the red button to disable the remote backup job and
the button will change to a green triangle. Clicking the green triangle
will enable the job again.
Backup now: Click to execute the backup job immediately as long as
the job is enabled.
Recovery: Click to write the backup les and folders back into the source
le system from the backup target system (reverse the le direction).
Navigation buttons: Use these buttons to move up and down in the list
when there are multiple jobs congured.
Refresh Button: Click this button during a backup or recovery process
to monitor the progress by updating the progress completed bar.