xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#disable igmp_snooping
Command: disable igmp_snooping
Success.
DGS-3400:4#
Example usage:
To disable forwarding all multicast traffic to a multicast-enabled router:
DGS-3400:4#disable igmp_snooping forward_mcrouter_only
Command: disable igmp_snooping forward_mcrouter_only
Success.
DGS-3400:4#
show igmp_snooping
Used to show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration
on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN to view the IGMP snooping
configuration for.
Restrictions None.
Purpose
Example usage:
To show IGMP snooping:
DGS-3400:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
Multicast router Only : Enabled
Query Interval : 125
VLAN Name : default
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 250
Route Timeout : 260
Leave Timer : 2
Querier State : Enabled
Querier Router Behavior : Non-Querier
State : Enabled
Fast Leave : Disabled
Total Entries: 1
DGS-3400:4#
125
To Next Page
Loading...
