xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax
show router_ports [static | dynamic | forbidden]
Description This command will display the router ports currently configured on the
Switch.
Parameters
<vlan_name 32> − The name of the VLAN on which the router port
resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
forbidden – Displays ports that are forbidden from becoming router ports.
Restrictions None.
Example usage:
Static router port :
To display the router ports.
DGS-3400:4#show router_ports
Command: show router_ports
VLAN Name : default
Dynamic router port: 32
Forbidden router port:
DGS-3400:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description
<vlan_name 32> − The name of the VLAN for which to view IGMP
snooping group information.
This command will display the current IGMP setup currently
configured on the Switch.
Parameters
Restrictions None.
Example usage:
To view the current IGMP snooping group:
126
To Next Page
Loading...
