xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show mld_snooping group
Command : show mld_snooping group
VLAN Name : default
Multicast Group : FF02 ::13
MAC Address : 33-33-00-00-00-13
Reports : 1
Listening Port : 1,7
VLAN Name : default
Multicast Group : FF02 ::14
MAC Address : 33-33-00-00-00-14
Reports : 1
Listening Port : 2,7
VLAN Name : default
Multicast Group : FF02 ::15
MAC Address : 33-33-00-00-00-15
Reports : 1
Listening Port : 2,9
VLAN Name : default
Multicast Group : FF02 ::16
MAC Address : 33-33-00-00-00-16
MAC Address : 33-33-00-00-00-17
DGS-3400:4#
Reports : 1
Listening Port : 2,7
VLAN Name : default
Multicast Group : FF02 ::17
Reports : 1
Listening Port : 2,7
Total Entries :5
show mld_snooping mrouter_ports
Purpose Used to display the current router ports set on the Switch.
Syntax
show mld_snooping group {vlan<vlan_name 32} {[static | dynamic |
forbidden]}
Description This command display the current router ports set on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN on which the router port
resides.
static – Displays router ports that have been statically configured.
dynamic – Displays router ports that have been dynamically configured.
forbidden – Displays router ports that have been configured as forbidden.
If no parameter is specified, the Switch will display all currently configured
router ports on the Switch.
Only administrator-level users can issue this command. Restrictions
Example usage:
To display the MLD snooping multicast router port settings:
134
To Next Page
Loading...
