xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Disabled
Multicast Router Only : Disabled
VLAN Name : default
Query Interval : 125
Last Listener Query Interval : 1
Max Response Time : 10
Robustness Value : 2
Node Timeout : 260
Router Timeout : 260
Done Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Fast Done : Disabled
Total Entries : 1
DGS-3400:4#
show mld_snooping group
Purpose Used to display MLD snooping group configurations on the Switch.
Syntax
show mld_snooping group {vlan <vlan_name 32}
Description This command display MLD snooping group configurations on the Switch.
Parameters
vlan <vlan_name 32> − The name of the VLAN for which to view the MLD
snooping group configurations.
If no parameter is specified, the Switch will display all current MLD snooping
group configurations.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the MLD snooping group settings:
133
To Next Page
Loading...
Need help?
General