xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
show auth_statistics
Purpose Used to display the current authentication statistics.
show
auth_statistics {ports <portlist> | all]}
Description The show auth_statistics command is used to display the current
authentication statistics of the Switch on a per port basis.
Parameters
ports <portlist> − Specifies a range of ports.
all – Specifies that all ports will be viewed.
Restrictions None.
Syntax
Example usage:
To display the current authentication statistics for port 16:
DGS-3400:4#show auth_statistics ports 16
Command: show auth_statistics ports 16
Port number : 16
EapolFramesRx 0
EapolFramesTx 0
EapolStartFramesRx 0
EapolReqIdFramesTx 0
EapolLogoffFramesRx 0
EapolReqFramesTx 0
EapolRespIdFramesRx 0
EapolRespFramesRx 0
InvalidEapolFramesRx 0
EapLengthErrorFramesRx 0
LastEapolFrameVersion 0
LastEapolFrameSource 00-00-00-00-00-00
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
150
To Next Page
Loading...
