D-Link xStack DGS-3450 - Page 152

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show auth_diagnostics ports 16
Command: show auth_diagnostics ports 16
Port number : 16
EntersConnecting 0
EapLogoffsWhileConnecting 0
EntersAuthenticating 0
SuccessWhileAuthenticating 0
TimeoutsWhileAuthenticating 0
FailWhileAuthenticating 0
ReauthsWhileAuthenticating 0
EapStartsWhileAuthenticating 0
EapLogoffWhileAuthenticating 0
ReauthsWhileAuthenticated 0
EapStartsWhileAuthenticated 0
EapLogoffWhileAuthenticated 0
BackendResponses 0
BackendAccessChallenges 0
BackendAuthSuccesses 0
BackendOtherRequestsToSupplicant 0
BackendNonNakResponsesFromSupplicant 0
BackendAuthFails 0
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
show auth_session_statistics
Purpose Used to display the current authentication session statistics.
Syntax
show auth_session_statistics {ports <portlist | all>}
Description The show auth_session statistics command is used to display the
current authentication session statistics of the Switch on a per port
basis.
Parameters
ports <portlist> − Specifies a range of ports.
all – Specifies that all ports will be viewed.
Restrictions None.
Example usage:
To display the current authentication session statistics for port 16:
DGS-3400:4#show auth_session_statistics ports 16
Command: show auth_session_statistics ports 16
Port number : 16
SessionOctetsRx 0
SessionOctetsTx 0
SessionFramesRx 0
SessionFramesTx 0
SessionTime 0
SessionId
SessionAuthenticMethod Remote Authentication Server
SessionTerminateCause SupplicantLogoff
SessionUserName Trinity
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
149