xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#reconfig member_id 2
Command: reconfig member_id 2
DGS-3400:4#
Login:
config sim_group
Purpose Used to add candidates and delete members from the SIM group.
Syntax
config sim_group [add <candidate_id 1-100> {<password>} |
delete <member_id 1-32>]
Description This command is used to add candidates and delete members from
the SIM group by ID number.
Parameters add <candidate_id 1-100> <password> - Use this parameter to
change a Candidate Switch (CaS) to a Member Switch (MS) of a
SIM group. The CaS may be defined by its ID number and a
password (if necessary).
delete <member_id 1-32> - Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Restrictions Only administrator-level users can issue this command.
Example usage:
To add a member:
DGS-3400:4#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK!!!
SIM Config Success !!!
Success.
DGS-3400:4#
To delete a member:
DGS-3400:4#config sim_group delete 1
Please wait for ACK!!!
DGS-3400:4#
Command: config sim_group delete 1
SIM Config Success!!!
Success.
232
To Next Page
Loading...
