D-Link xStack DGS-3610 Series Hardware Installation Guide

DGS-3610 Series H/W Installation Guide Chapter 1 Product Overview
1-5
L2 Protocol
IEEE802.3, IEEE802.3u, IEEE802.3z , IEEE802.3x, IEEE802.3ae,
IEEE802.3ak, IEEE802.3ad, IEEE802.1p, IEEE802.1x, IEEE802.3ab,
IEEE802.1Q (GVRP), IEEEE802.1d, IEEE802.1w, IEEE802.1s, IGMP
Snooping v1/v2/v3, LLDP
Defeat DoS Attack
Supported
Defeat IP Scan
Supported
L3 Protocol
OSPF,ECMP/WCMP,RIPv1/v2,PIM
(DM/SM/SSM),DVMRP,VRRP,IGMPv1/v2/v
Management protocols
SNMPv1/v2c/v3, Web (JAVA), CLI (Telnet/Console), RMON (1,2,3,9),
Cluster, SSH, SNTP, Syslog
Other protocols
DHCP Relay, DNS Client
Jumbo Frame
Supported
Dimensions (L x W x H)
440 X 435X44mm
Weight
About 8.5kg for DGS-3610-26
Power supply
DGS-3610-26:
AC voltage: 176-264VAC, at 48Hz-60Hz, with maximum current <0.4A
DC voltage (RPS power): 10.6-13.2VDC, with maximum current <6.6A
Power consumption
Without extension module: <54W; with extension module: <70W
Temperature
Operating temperature: 0ºC - 45ºC
Storage temperature -40ºC - 70ºC
Humidity
Operating humidity: 10% ~ 90% RH
Storage humidity: 5% - 90% RH
Table 1-2 Technical Specifications of DGS-3610 Switches
Product model
DGS-3610-26G
Fixed port
24 1000M SFP ports and 12 multiplexing 10/100/1000M RJ-45 ports, 2
10G extention slots
Available module
DEM-310GT (1000Base-LX, Single-mode, 10km)
DEM-311GT (1000ase-SX, Mutli-mode, 550m)
DEM-312GT2 (1000Base-SX, Multi-mode, 2km)
DEM-314GT (1000BASE-LX, Single-mode, 50km)
DEM-315GT (1000BASE-LX, Single-mode, 80km)
DEM-330T/R (WDM transceiver, Single-Mode 10km)
DEM-331T/R (WDM transceiver, Single-Mode 40km)
DEM-412X: 1-port XFP interface 10G conversion board
DEM-412CX: Single port 10G stack module.
DEM-421XT (10GBASE-SR, Multi-mode, 300m)
DEM-422XT (10GBASE-LR, Single-mode, 10km)
DEM-423XT (10GBASE-ER, Single-mode, 40km)
Packet forwarding rate
L2: wire speed (66Mpps)
L3: wire speed (66Mpps)

D-Link xStack DGS-3610 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3610 Series
Category	Switch
Language	English