DGS-3610 Series H/W Installation Guide Chapter 1 Product Overview
DEM-331T/R (WDM transceiver, Single-Mode 40km)
DEM-412X: 1-port XFP interface 10G conversion board
DEM-412CX: Single port 10G stack module.
DEM-421XT (10GBASE-SR, Multi-mode, 300m)
DEM-422XT (10GBASE-LR, Single-mode, 10km)
DEM-423XT (10GBASE-ER, Single-mode, 40km)
L2: wire speed (66Mpps)
L3: wire speed (66Mpps)
Standard IP ACL (IP address based hardware ACL)
Extended IP ACL (IP address based and TCP/UDP port number based
hardware ACL)
MAC extended ACL (source MAC address based, destination MAC
address based and optional Ethernet type based hardware ACL)
Time-based ACL
Expert level ACL (hardware ACL based on the flexible combinations of
VLAN number, Ethernet type, MAC address, IP address, TCP/UDP port
number, protocol type, and time)
IEEE802.3、IEEE802.3u、IEEE802.3z 、IEEE802.3x、IEEE802.3ae、
IEEE802.3ak、IEEE802.3ad、IEEE802.1p、IEEE802.1x、IEEE802.3ab、
IEEE802.1Q (GVRP)、IEEEE802.1d、IEEE802.1w、IEEE802.1s、IGMP
Snooping v1/v2/v3、LLDP
OSPF,ECMP/WCMP,RIPv1/v2,PIM
(DM/SM/SSM),DVMRP,VRRP,IGMPv1/v2/v
SNMPv1/v2c/v3, Web (JAVA), CLI (Telnet/Console), RMON (1,2,3,9),
Cluster, SSH, SNTP, Syslog
DGS-3610-50P:
AC Voltage: 176-264VAC,48Hz-60Hz ; Maximum current: <6A
DC Voltage(RPS power supply): 51.895-55.105VDC; Maximum current:
<16.3A
Without the external PD overload or the extension module: <90W;
Without the external PD overload but with the extension module: <105W;
With the external 48-port PD overload but without the extension module:
<830W;
With the external 48-port PD overload and the extension module: <845W;
Operating temperature: 0ºC - 45ºC