Hot Water for Tea and Other Drinks
Use the hot water button to brew tea and other hot flavored drinks. The
coffee system makes about four ounces of hot beverage at a time.
1. Put the proper amount of tea or mix for your hot drink into a cup or
glass.
2. Put the cup or glass under the hot water dispenser.
3. Push the hot water button. You will hear the water pump hum as hot
water is dispensed. You may push the hot water button again to make
the coffee system stop before the normal amount is dispensed.
Hot Water Button
Hot water Dispenser
4. If you want more hot water dispensed, wait until the display reads
"Machine Ready", then push the hot water button again. You can also
program the coffee system to dispense more hot water each time the
button is pushed. See page 26.
5. When the display reads "Machine Ready", carefully remove the cup
or glass from the brewing compartment. Stir until the drink is properly
mixed.
@ NOTE
The hot water dispenser cannot be used for steam.
To Next Page
Loading...
Need help?
General
